MaTig-501 Automatic welding system

Fixed angle electrode position setup

The proposed system will maintain the welding geometry granting the perfect repeatability of every weld. Each geometry will have a dedicated angle setup easily interchangeable, really stable and solid.

Tungsten clamping head unique in it’s kind

The new system of the tungsten clamping allows a fast substitution of the electrode without any need of tooling and without moving the geometry of the filler wire guide, making this operation fast and precise.

Automized management of the filler wire

• Control of the effective flow of the filler wire
• Control of the end spool
• Revolutionary system of filler wire feeding, centered on the orbital axes which allows a continuous and regular flow improving the precision and distribution of the filler wire bath during the welding

INTERPOL3

Automatic programming of "radial off set" weld beam variation

Automatization of the radial off set for multi-pass welding: Possibility to CNC program the radius variation of the second pass without any hand-action from the operator (this will improve drastically the welding time).
The rotation of the welding head is controlled by the CNC and it is interporable with the other axes.

Exclusive FOCS2 centring system

The exclusive FOCS2 centring system attached to the CNC, devoid of the traditional mechanical contact accessories, already widely tested on our MA-2501 work centres, ensures the highest precision in the geometry of the welded joints.
It is a self-learning electropneumatic automatic tube centring device which is controlled by software exclusively created by Maus Italia:

• Rapid location of the workpiece zero
• Calculation and storage of the grid position of the holes on the tubesheet

AVC System technology

The AVC system ( Arc Voltage Control ), based upon the principle of Ohm’s Law, automatically manages the height of the arc during welding.
The AVC technology involves the continuous monitoring of the voltage of the voltaic arc during welding, allowing it to modulate the distance of the electrode from the weld pool:
This results in continuous penetration across all the welding being performed. In the MaTig-501, the AVC system is standard and is used in the management of the following:

• Touch: workpiece search and electrode positioning at the required distance
• Retract: pre-determined retraction of the electrode and wire nozzle in the case of multiple passes
• Sharpening control: during formation of the weld pool, the measuring of the arc voltage allows you to check that the sharpening of the electrode is correct
• Arc voltage: an alarm can be activated should the voltage of the arc fall below a pre-determined value.
• Combined with the Interpol e allows to module the distance and the positioning of the electrode tube sheet in 3 dimension.

Hardware CNC

The electronic management of the new MaTig-501 is entrusted to the latest generation SIEMENS CNC hardware

Highest grade components

The components used in the construction of the MaTig-501 are sourced from world leaders, such as Bosch, Siemens and Festo

High speed guaranteed

The new MaTig-501 guarantees a higher torch rotation speed, in excess of 10 r.p.m., with a consequent substantial lowering of welding down times.

Third gas line

The MaTig-501’s exclusive welding torch allows the use of the third gas and the consequent possibility of separate management of each individual gas

Cooling system boosted for 24/7 use

The MaTig-501 is equipped with a brand new water cooling system inside the torch which allows it to significantly improvement the weld performance